HYCO SF05K Speedflow 5 Litre 2.0kW Unvented Water Heater

Outer CasingEasy clean, high impact plastic Heating ElementStainless steel flange type ThermostatBulb type adj. to 75°C E setting approx. 50°C Water TankGlass lined steel as standard. Stainless steel tank optional upgrade. AnodeReplaceable grey magnesium (inspect annually) InsulationHigh density polyurethane foam SafetyOverheat temperature protection (manual reset). Supplied pressure relief valve must be fitted in every case (set at 6 bar). Frost protection if power on. Optional thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature. IP RatingIPX4 InstallationSite above or below the sink, but inlet and outlet must be at the top. Floor standing or wall mounted. PlumbingMust be installed by a suitably qualified person.It is recommended that flexible hoses are used for connection to facilitate future maintenance. Access to the thermal cut-out and element is located at the base of unit.Minimum water pressure 0.5 bar.Maximum water pressure 4.2 bar. Water connectionInlet/ Outlet 2 x 1/2″ BSP male (100mm apart centre to centre).Fittings required (not supplied): 2 x 15mm compression to 1/2″ BSP female adapter. Electrical ConnectionInstallation must comply with current IEE regulations.The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.Cable pre-wired (1.5m). ApprovalsCE, WRAS Standard WarrantyGlass Lined Tank: 1 year parts or replacement warranty. Stainless Steel Tank: 3 year tank warranty.