HYCO HF05MVC Handyflow Undersink Vented Point of Use Water Heater with 5 Litre Capacity

Outer CasingEasy clean, high impact plastic Heating ElementIncoloy-sheathed coil ThermostatCapillary type adjustable to approx. 80⁰C E setting approx. 55⁰C Water TankPolypropylene InsulationHigh density polystyrene CFC free SafetyOpen outlet non-pressurised system, vented mixer tap must be used.Safety re-settable thermal cut out. Frost protection setting when power is switched on. Heating CycleIt is normal for the vented tap on this type of unit to drip slightly during the heating cycle, caused by the water expanding as it heats up. IP RatingIP24 InstallationMust be sited below a sink, with the inlet and outlet connections at the top of the unit. PlumbingMust be installed by a suitably qualified person.Minimum water pressure 0.5 bar.Maximum water pressure 8.0 bar. Water ConnectionCold water connection 1 x 15mm compression.Outlet 1 x vented tap (supplied).Fittings required (not supplied): none. IMPORTANT : ONLY USE THE FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED Electrical ConnectionInstallation must comply with current IEE regulations.The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.Cable pre-wired (1m). ApprovalsCE Standard Warranty1 year parts or replacement warranty.