Outer Casing Easy clean high impact Polycarbonate/ABS Heating Element Copper-sheathed coil Water Container Glass reinforced nylon Controls On/Off: HW30M Rotary switch Temperature Selection: HW30M and HW30A Rotary dial Safety Self re-setting thermal cut-out set at 60°C. Manual resettable cut-out set at 90°C. Pressure relief valve to prevent high-pressure build up. Temperature stabilised – unit maintains consistent outlet temperature as water pressure conditions vary. IP Rating IPX4 Installation The appliance must be installed in a frost free environment. Wall mounted. Base assembly is secured to the wall by two fixing screws. Full fixing pack supplied. Plumbing Must be installed by a suitably qualified person. Minimum water pressure 1.0 bar. Maximum water pressure 6.0 bar. Water Connection Inlet 1 x 15mm compression. Outlet 1 x push fit chrome plated brass spray arm 200mm (8″). Electrical Connection Installation must comply with current IEE regulations This product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps. Approvals CE, WRAS Standard Warranty 1 year parts or replacement warranty.
Related products
Sale!
SD Tools