HYCO MBS6 Microboil Wall Mounted Near-Instant Boiling Water Heater 6 Litre in White

<p><strong>Outer Casing</strong><br />White powder coated steel or stainless steel (SS)</p> <p><strong>Heating Element</strong><br />2.4 kW, Incoloy-sheathed type element</p> <p><strong>Thermostat</strong><br />Electronic to control water up to boiling point</p> <p><strong>Water Tank</strong><br />Copper<br />5 year corrosion guarantee</p> <p><strong>Insulation</strong><br />Polystyrene</p> <p><strong>IP Rating</strong><br />IPX0</p> <p><strong>Recovery Rate</strong><br />Recovery rate 150 cups per hour for all models based on 167 ml cup size.</p> <p><strong>Installation</strong><br />Install over a draining board, or work top fitted with a drip tray.<br />At least 40mm clearance must be left above the unit to allow later removal of the jacket for service.</p> <p><strong>Plumbing</strong><br />Must be installed by a suitably qualified person.<br />Minimum water pressure 1 bar.<br />Maximum water pressure 12 bar.</p> <p><strong>Water Connection<br /></strong>Inlet/ Outlet 2 x 1/2″ BSP male. Fittings required (not supplied): 2 x 15mm compression to 1/2″ BSP female adaptor. <br />1 x tundish recommended.</p> <p><strong>Electrical Connection</strong><br />Installation must comply with current IEE regulations.<br />The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.<br />Cable pre-wired (1.5m) to the bottom left.</p> <p><strong>Maintenance</strong><br />it is recommended the unit is descaled every 6 months.</p> <p><strong>Approvals</strong><br />CE, KIWA</p> <p><strong>Standard Warranty</strong><br />1 year on-site warranty as standard.</p>