HYCO HF05LM Handyflow Oversink Vented Point of Use Water Heater with 5 Litre Capacity

Outer CasingEasy clean, high impact plastic Heating ElementCopper-sheathed type element ThermostatCapillary type adjustable to approx. 80⁰C E setting approx. 55⁰C Water TankPolypropylene InsulationHigh density polystyrene CFC free SpoutLength 10” (250mm) SafetyOpen outlet non-pressurised system, supplied tap and spout must be used.Safety re-settable thermal cut out. Frost protection setting when power is switched on. Heating CycleIt is normal for the spout on this type of unit to drip slightly during the heating cycle, caused by the water expanding as it heats up. IP RatingIP24 InstallationMust be sited above a sink using the wall fixing bracket supplied, with the spout and tap located at the bottom of the unit. PlumbingMust be installed by a suitably qualified person. Minimum water pressure 0.3 bar.Maximum water pressure 8.0 bar. Water ConnectionInlet valve/tap 1 x 15mm compression.Outlet 1 x chrome plated brass spray arm. Fittings required (not supplied): none. Important : ONLY USE THE FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED Electrical ConnectionInstallation must comply with current IEE regulations.The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.Cable pre-wired (1m). ApprovalsCE Standard Warranty1 year parts or replacement warranty.