Bespoke Fabric Tablecloths
$ 21.63
- Description Overview Printed on 210gsm Display Polyester. Finished with a standard 10mm hem all around. Dye-sublimation printed for vibrant colours and images Each tablecloth is printed and to your requirements. M1/B1 fire-rated to comply with UK and European fire safety standards Standard finishing included at no extra charge Approx maximum finished graphic width: 3000mm (depending on chosen finish) Roll width: 3200mm Display Polyester Tablecloths are printed via a process of dye-sublimation which uses special inks and undergo a post-print heating process to ‘fix’ the ink into the fabric. This makes it both scuff-resistant and washable. Tablecloth Drop Length You will need to know the amount of ‘drop length’ (also known as ‘overhang’) required from the edge of the table. This is the amount that the tablecloth will hang from the edge of the table down towards the floor. For most situations, and especially where people will be sitting at a table, a 150mm to 200mm drop length is fine. For a longer drop length, such as the front of a table at a convention or expo, we recommend going much closer to the floor. The greater drop length grants more privacy as well as a larger area for branding. How to Order Rectangle Tablecloths To determine the size of a rectangular tablecloth to order, you will first need to know the length and width of the table for which it will be used, as well as the drop length required. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor. Assuming a consistent drop length of 150mm around the whole table: Take the drop height and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your ‘drop addition’. Take the table length and add the ‘drop addition’ from above (e.g. 2000mm 300mm = 2300mm). The finished length will be 2300mm. Take the table width and add the ‘drop addition’ from above (e.g. 1000mm 300mm = 1300mm). The finished width will be 1300mm. The finished size to order will be 2300mm × 1300mm. Please order Display Polyester at this size with ‘Hems Only’ as the finish. How to Order Circular Tablecloths To determine the size of a circular tablecloth to order for a circular table, you will first need to know the diameter of the table for which it will be used. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor. Assuming a consistent drop length of 150mm around the whole table: Take the drop height and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your ‘drop addition’. Take the table diameter and add the ‘drop addition’ from above (e.g. 1500mm 300mm = 2800mm). The finished size to order will be 2800mm × 2800mm. Please order this size with ‘Shape Cut’ as the finish, and let us know that a circular shape is required.
